LAMINAM · EXCLUSIVE DISTRIBUTOR
The world’s thinnest ceramic surfaces.
Made in Italy.
Since the early 2000s, Laminam has made large, thin ceramic slabs in Italy, as slim as 2 mm, light enough for façades, and strong enough for kitchen tops.
WHAT SETS LAMINAM APART
The slab that set the standard
Beyond being hard-wearing, Laminam stands out for its origins, how thin it goes, and where it can be used.
01
The pioneer
Founded in the early 2000s, Laminam was the first ceramic producer to make slabs 2.2 mm thick.
02
As thin as 2 mm
Laminam’s revolutionary twO slabs, an unparalleled innovation, are light enough to wrap doors, cabinets and furniture.
03
Façade systems
For ventilated façades, over-coating and bonding, with technical support from Laminam.
04
With Lamborghini
Together they created Automobili Lamborghini Surfaces, in Silentium, Tumultus and Tempestas, winning over architects and designers internationally.
FOR YOUR HOME
Made for real homes
Stain-resistant: surface porosity below 0.1%, so it doesn’t absorb dirt
Food-safe kitchen tops: NSF-certified for food contact
Built for busy homes: resists impacts, stains and scratches, even with heat and UV
Big slabs: up to 1620 × 3240 mm, so surfaces need fewer joints
Simple to clean: warm water and a neutral detergent, no special care needed
2 mm
THE WORLD’S THINNEST, FROM 2 MM
Thin enough to go anywhere
Laminam’s thinnest slabs, from 2 mm to 3.5 mm, bring a ceramic finish to furniture, doors and walls. Sustainable at the core, they’re created with recycled and totally recyclable materials.
Furniture and doors: a ceramic finish for cabinets, wardrobes and doors (from 2 mm)
Feature walls: 2+ mm and 3+ mm slabs up to 3 m tall
Backsplashes: slim wall panels from 2.6 mm
Tables: from 2 mm when properly supported
Furniture and doors
Feature walls
Kitchen backsplashes
EXTERIOR FAÇADES
Built for the outside of buildings
Laminam’s slabs are very thin and lightweight, so they don’t weigh down load-bearing structures and can be installed even at great heights. Laminam offers technical support and BIM files for façade projects.
They resist rain, wind, UV rays and thermal shocks, and keep their colours unaltered over time.
Architectural façade systems: ventilated façades, over-coating and bonding, with mechanical or adhesive fixing
Lightweight: very thin, so they don’t weigh down the structure
UV-resistant: colours stay unaltered over time
Fireproof: won’t spread flames in a fire
Low maintenance: easy to clean, and resistant to corrosion and chemicals
COLLECTIONS
Over 100 surfaces, 18 collections
From Carrara marble to slate, wood, metal and solid colours. Four of our favourites:
I Naturali
Rare
In-side
Gemini
Also: Slate, Calce, Filo, Fokos, Oxide, Ossido, Seta, Hado, Ki No Bi, Diamond, Blend and more. Browse all Laminam surfaces →
FOR SUSTAINABLE PROJECTS
A responsible choice for green buildings
In Laminam’s words, “sustainability is in our very DNA.” Laminam is made from 100% natural raw materials, with up to 60% recycled content, and its slabs can be recycled. It also provides the data architects need.
EPDs for every thickness
Environmental Product Declarations, with life-cycle data, for slabs from 2 mm to 20 mm.
LEED and BREEAM
Laminam slabs can help projects earn green building credits.
Measured footprint
ISO 14001 environmental management, with its carbon footprint measured to ISO 14064-1.
Solar-powered production
Solar power runs Laminam’s Fiorano kilns during the day.
THICKNESS GUIDE
The right slab for every surface
From 2 mm to 20 mm, in slabs up to 1620 × 3240 mm. Sizes and thicknesses vary by design, so ask our team what’s available for the look you like.
| Application | Laminam thickness |
|---|---|
| Kitchen tops | 12+ or 20+ |
| Vanity and table tops | 12+ or 20+ |
| Flooring | 5+, 12+ or 20+ |
| Walls and feature walls | 2+, 3+ or 5+ |
| Exterior façades | 3+, 5+, 12+ or 20+ |
| Doors and furniture | 3+ or 5+ |
Based on Laminam’s recommendations. Confirm suitability for your project with our team.
WHY BUY FROM POLYBUILDING
Supplied, fabricated and installed by one team
As Laminam’s exclusive distributor, we supply the slabs, cut them in our Tuas factory with precision 5-axis machinery, and install them with our own team.
Architects and designers get Laminam’s technical documentation and BIM files, plus our advice on thickness, detailing and samples.
Find your Laminam surface
Browse our Laminam designs online, or talk to our team about your project.
